Press the Space Bar to log a point
Press the Return Key on your keyboard to advance to the next point
Speed up your Benchtop Calibration tests by using keyboard shortcuts
Make your benchtop calibration tests go even faster by using keyboard shortcuts to log each point and advance to the next point.
Related Articles
Change Last Calibration and Next Calibration Dates on a Field Gauge
All Ralston Gauge models display a helpful reminder for the next date the device is due for calibration, as well as the last time it was calibrated. You can change the date based on your device calibration schedule with FieldLab Desktop. This ...Run a Calibration Test from your computer
Calibration Tests can be run right from your computer with Benchtop Calibration. Minimum Requirements: A Ralston FieldLab pressure device with provided USB cable to use as your reference. A Windows computer with FieldLab Desktop software installed ...Create a new Calibration Test
Create custom Calibration Tests to test the accuracy of any analog or digital pressure device. Once created, you can run the custom test on your computer or on a FieldLab Pressure Calibrator. 1 Go to the Test Modes Library in FieldLab Desktop. 2 ...Run a Calibration Test on another device from your computer with a Ralston Gauge
Use a Ralston Gauges as a reference to calibrate other devices. Calibration Tests can be run right from your computer with Benchtop Calibration. This article applies to Ralston Field Gauge and FieldLab, all models with a pressure port. Minimum ...Calibration Test Screen Overview
Introduction to the Calibration Test screen in FieldLab Desktop. Create and edit the custom Calibration Test you need. Test Mode Name - Name your Test Mode. PSI - Engineering Units Menu - Select the engineering units you want to measure pressure in. ...
Recent Articles
Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30
This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...Operation Instructions 10,000 psi Hand Pump (Model XTHP)
Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...Operation Instructions 5000 psi Hand Pump (Model QTHP)
Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth
What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...