Battery Life

Battery Life

Battery Life of a FieldLab Digital Pressure Calibrator

From a fully charged battery:

  1. Approximately 72 Hours with backlight on
  2. 2,016 Hours with display in sleep mode.
    • Related Articles

    • Clock Battery Critical

      Return instructions for getting your clock battery replaced. If your FieldLab is displaying this message, then the date & time displayed on the FieldLab screen and in saved data sets could be incorrect or unavailable until the clock battery is ...
    • Adjust Settings for Auto Backlight on a FieldLab during a Data Logging Test

      Use FieldLab Desktop to control the amount of time that the backlight stays on before shutting off automatically to conserve battery life. Each Test Mode has its own settings. When you Activate a Test Mode on the FieldLab, whatever the settings are ...
    • Charge your FieldLab battery

      1 Assemble the charger. 2 Plug charger cord into the rear of the FieldLab. Thread tightly. 3 Plug charger cord into a wall socket. Recommended charge time: 24 hours on first charge. Charge overnight after each use.
    • Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator

      Download in PDF format below.
    • Warnings for FieldLab Digital Pressure Calibrator

      WARNING: DO NOT CHARGE BATTERY IN CLASS I, DIV 1/ZONE 0 HAZARDOUS LOCATIONS. WARNING: DO NOT CONNECT TO USB PORT IN HAZARDOUS LOCATIONS. WARNING: DO NOT CONNECT TO POWER PORT IN CLASS I, DIV 1/ZONE 0 HAZARDOUS LOCATIONS. WARNING: EXPLOSION HAZARD. IN ...
    • Recent Articles

    • Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

      This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...
    • Operation Instructions 10,000 psi Hand Pump (Model XTHP)

      Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...
    • Operation Instructions 5000 psi Hand Pump (Model QTHP)

      Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...
    • Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

      What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...
    • A Gauge is Overpressurized

      Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...